If you are running a unifi controller on Linus and get the message to say that the codename has changed you need to manually accept the changes through APT – to do this, issue the following command: apt-get update –allow-releaseinfo-change then run apt-get upgrade to carry out the update.
Category: Unifi
How to Reset Unifi AP
As a warning when you choose to reset the device please keep the device powered on and do not connect while the reset it taking place. The reset should only take a couple of minutes to complete. Physical Factory Reset Finds a suitable thin object (Paperclip or similar) Locate the reset button on the bottom […]
UniFi Controller (SSH Login)
In the newer controller versions, you should be able to go to Settings -> NETWORK SETTINGS -> Device Authentication To view the SSH credentials. UniFi 5.6.x Controller Go to Settings -> Site -> DEVICE AUTHENTICATION If you have a reset unifi device the default SSH login is: Username: ubnt Password: ubnt
Rename AP on Unifi Controller
1. Select Devices in left sidebar 2. Select the device that you would like to change the name (alias) of: 3. In the right pane select the config tab: 4. In the general section change the Alias to whatever you would like: For newer Version 7 Unifi controllers. 1. Select Devices in left sidebar Select […]